1. Before operation, please check, your local gas source and your Teppanyaki equipment’s nameplate marked in the gas source is consistent.
2. When the gas source"s consistency is confirmed, first turn on the main power, and then start the fan switch, the damper knob down to the clockwise direction to adjustto a larger, a few seconds later, the exhaust cleaning will take place.
3. Then open the gas main valve and"Teppanyaki" gas valve, use your right hand to lift the gas switch and rotate 15 degrees counterclockwise, release after about 10seconds, at this time, the gas seeding fire open, suction thermocouple safety valve, and then again press the gas switch, rotate 90 degres counterdockwise and thenrelease, at this time, the main fire is open and in a larger position.
4. fyou need to tum down the main fire,you can use your right hand to lift down the gas switch and rotate it countercockwise to 170 degres, which is the smaest fire
5. lf the Teppanyaki is equipped with a smoke purifier, please turn it on again before cooking.
6. lf you need to tum off the "Teppanyaki" gas switch, clockwise rotation to the 0 position.
7. fit can sti not be sucessfuly ignited after several times of tny, open the valve again,to eliminate excess pipeine air and then check whether the ignition line andbatery is effective. Waring: the design of electrical components must be instaled with the zero grounding ine, the ignition must be tured on before the fan!
PLEASE NOTIFY:
1. Users must carefully read the "instructions for use” before operation and strictly follow the instructions for its long-term quality.
2. lt does not allow the placement of flammable and explosive substances anywhere close to the teppanyaki equipment.
3.Users are not allowed to privately modify the gas pipline or dismantle their own gas appliances and equipment so as not to cause gas leakage and other accidents.
4. The installation, service and overhaul of teppanyaki equipments must be operated by professional electricians.
5. Please do not use excessive force while operating.
6. When cleaning and sanitizing, please be careful. Do not allow water to enter the electrical components.