logo
Latest company case about

Solutions Details

Created with Pixso. Home Created with Pixso. solutions Created with Pixso.

Cleaning method of oil fume purifier

Cleaning method of oil fume purifier

2024-11-25

1. Use the key provided with the purifier to open the main door and enter the purifier electrical control box.
2. Turn off and confirm that the power of the "Teppanyaki" is off
3. Please use a screwdriver to unscrew the fixing screws of the plate
4. Pul out the filter and plate carefuly, and be careful not to use too much force to avoid damaging the plate and the components on the plate
5. Please pour hot water into the pre-prepared cleaning container until it is 70% ful., Eouipped with plate cleaning liguid.
6. oak the electrode plate in the deaning liquid. It is recommended that the soaking time should not exced 10 minutes. If the plate is too dirty, the soaking time can beappropriately extended.
7. Take the soaked plate out of the water and let it dry naturally, or use a tool with a temperature not exceeding 100 degrees to dry it
8. Use a cotton cloth to wipe the inside ofthe purifer dean and clean up the debris, Such as around the purifer around the oil drain hole. etc
9.lnstal the airdried plates backinto the purifier as they were when they were extracted,tighten the screws with the T-shaped handle or use the handlelock to close theelectric control box and the purifier and lock the door.
Note: Do not open the fume purifier while the power is on, as there is a hiah voltage risk

banner
Solutions Details
Created with Pixso. Home Created with Pixso. solutions Created with Pixso.

Cleaning method of oil fume purifier

Cleaning method of oil fume purifier

1. Use the key provided with the purifier to open the main door and enter the purifier electrical control box.
2. Turn off and confirm that the power of the "Teppanyaki" is off
3. Please use a screwdriver to unscrew the fixing screws of the plate
4. Pul out the filter and plate carefuly, and be careful not to use too much force to avoid damaging the plate and the components on the plate
5. Please pour hot water into the pre-prepared cleaning container until it is 70% ful., Eouipped with plate cleaning liguid.
6. oak the electrode plate in the deaning liquid. It is recommended that the soaking time should not exced 10 minutes. If the plate is too dirty, the soaking time can beappropriately extended.
7. Take the soaked plate out of the water and let it dry naturally, or use a tool with a temperature not exceeding 100 degrees to dry it
8. Use a cotton cloth to wipe the inside ofthe purifer dean and clean up the debris, Such as around the purifer around the oil drain hole. etc
9.lnstal the airdried plates backinto the purifier as they were when they were extracted,tighten the screws with the T-shaped handle or use the handlelock to close theelectric control box and the purifier and lock the door.
Note: Do not open the fume purifier while the power is on, as there is a hiah voltage risk